Corsair Commander Pro to control the fans (see script and code)ĬPU FAN: 1xCorsair H60 CPU Radiator - Front

OS: 1 x Kingston UV400 120GB SSD - boot driveįANS: 3xFractal R3 120mm - 3 Front, 1 Rear. SSD: 4 x Samsung 850 EVO Basic (500GB, 2.5') - VMs/Jails

Use existing Drives 8 x10TB WD Red, 8 x4TB WD Purple, + a mix of WD Purple and shucked WD Elements 12TB x 8ĬPU: Xeon E5-2620v4 + Corsair H60 Cooler block.

1 xLSI Logic Controller Card 05-25699-00 9305-24i 24-Port SAS 12Gb/s PCI-Express 3.0 Host Bus Adapter.

6 xCableCreation Internal Mini SAS HD Cable, Mini SAS SFF-8643 to Mini SAS 36Pin SFF-8087 Cable.

1 xNORCO 4U Rack Mount 24 x Hot-Swappable SATA/SAS 6G Drive Bays Server Rack mount RPC-4224.

Corsair Commander Pro to control the fans (see script and code)

3 xNoctua NF-F PWM (120mm) * having noted later in Stux's thread that 1500 RPM is not sufficient to cool the HDDs.

2 xNoctua NF-A8 PWM Premium 80mm PC Computer Case Fan.

4 x Kingston Value RAM (32GB, DDR4-2400, ECC RDIMM 288).

1 x Corsair HX1200 (1200W) - PSU to support 24 HDD + several SSD and PCI cards.

1 x Kingston UV400 120GB SSD - boot drive (hit the 3D NAND/TRIM bug with the original WD green selection, failing scrub and showing as corrupted OS files) Decided to go with no mirror and use the config backup script.

2 x WD Green 3D NAND (120GB, 2.5') - Boot drives (maybe mess around trying out the thread to put swap here too link).

1 x ASUS Z10PA-D8 (LGA 2011-v3, Intel C612 PCH, ATX) - Dual socket MoBo.

Aiming to mostly replicate the build from (with some mods, hopefully around about as good as that link)

Corsair commander linux